|
   |
Equipment
|
Curbmaking Machines -
Sod
Cutters - Mixers
Plate
Compactors -
Curbing
Trailers |
|
Curbmaking Machines
|
|
Model 207
 |
Decorative Curbmaking Machine Model 207:
- Constructed of heat treated, abrasion
resistant carbon steel, powder coated and chromed
- Engine: Honda IC (Industrial/Commercial) 6.5 HP
- Sized and balanced hydraulic system
- Heat treated, abrasive resistant, carbon steel
compaction tube
- High grade steel molds with AR (abrasion resistant) Skid Plate
- High grade steel, hard faced auger
- Adjustable carriage, side to side
- The wheels are set back under the carriage for tighter turning radiuses
- All machines are equipped with grease zerk fittings for easy serviceability
- Operator Controls: Hydraulic Valve, Forward and Reverse with two speed system
- Special wide pneumatic tires allow
positive and easy steering and keep the machine from sinking
in soft soil.
- This machine is totally self contained, weighing 180 lbs wet (including fluids)
- Dimensions: length 39", width 23"
- Productivity: 10 to 20 feet of concrete
curb per minute, depending on mold used
- You can run true concrete, ie: aggregate mix (rocks in
the material)
|
|
Model 225
 |
Decorative Curbmaking Machine Model 225:
Separating the power unit from the extrusion head allows
the extrusion head to easily maneuver without the weight of
the power unit or vibration of the engine. The Power and
Extrusion Head Units, connected by a set of hydraulic hoses
encased in a protective sheath, include special wide pneumatic
tires allowing positive and easy steering and keep the machine
from sinking in soft soil.
The Model 225 consists of 2 separate heavy duty units; one
Extrusion Unit (top picture) and one Power Unit (bottom unit).
The units are constructed of heat-treated abrasion resistant
carbon steel, powdered, coated and chromed.
- Engine: Honda IC (Industrial/Commercial), 11 HP Gasoline
Engine
- Hydraulic Pump, Tank, and Hoses (for
connection to the Extrusion Head)
- Locking front wheel to secure the unit in place on hilly
or uneven terrain.
- 2 Filters for Guaranteed Hydraulic Oil Protection
The Power Extrusion Head Consists Of:
- Hydraulic Motor commercial quality high torque hydraulic motor
- Operator Controls: Hydraulic Valve, Forward and Reverse with two speed system
- Hopper, easy feed, extra wide, can be fed with a concrete truck
- High Grade Steel Mold
- Heat Treated, Abrasive Resistant; Carbon Steel
Compaction Rube
- High Grade Steel, Hard Faced Auger
- Adjustable carriage, side to side, zero tolerance allows
for extruding material right against existing objects.
- Adjustable struts to keep the machine level on any
terrain.
- Productivity: 10 to 20 feet of concrete curb per minute,
depending on mold used
- Capable of producing 6000 PSI concrete providing the
correct mix is used
- The extrusion head weighs 75 lbs wet (including fluids)
- Dimensions: length 32", width 23"
|
Sod
Cutters |
|
Turfco KisCutter
Sod Cutter
 |
Turfco KisCutter Sod Cutter:
The Turfo Direct KisCutter sets a new standard for sod
cutters. Simple, durable, easy to use and weighs only
140 pounds. Loading and unloading is a snap with a
handle that transforms for lifting and hauling. Stable
4-wheel design with rear wheel drive makes unit easy to handle
and operate.
- 5.5 Honda engine (Model 85508)
- 12" cut width, adjustable depth
- Centrifugal clutch-driven V-belt
- Speed & productivity: up to 150' per minute, up to 9,000
square feet per hour
- Blade is heat-treated steel
- 10" x 4.5" pneumatic wheels
- Dimensions: only 140 pounds, 43" height x 23" wide x 36"
long
|
Plate
Compactors |
|
Dynapac LF 45
 |
Dynapac LF 45:
- Engine: Honda GX100 3.0 HP gasoline
- Plate: 11" wide
- Weight: 88 pounds
- Lifetime lubricating roller bearing
- Block paving set
- Speed: 85' per minute, Frequency (vpm) 6,000
- Centrifugal Force (lbs) 1800
- Lifetime lubrication of eccentric element
- Equipped with lifting device
|
|
Dynapac LF 62
 |
Dynapac LF 62::
- Engine: Honda GX120 4.0 HP gasoline
- Plate: 13" wide
- Weight: 132 pounds
- Lifetime lubricated roller bearings
- Block paving set, water sprinkler
- Speed: 79' per minute, frequency, vpm: 5,520,
centrifugal force, lbs: 2,250
- Lifetime lubrication of eccentric element
- Equipped with lifting device
|
Mixers |
|
Crown 12S
 |
Crown 12S:
Introducing Decorative Curbmaking Machine's new line of
hydraulic mixers. The 12SH has an optional mixing system
that provides a better and faster mix and Crown's new
maintenance free seal design. The Crown 12SH Series of
Hydraulic Mixers are built with the needs of the serious
producer in mind.
- Will Mix Concrete or Mortar
- Features Hydraulic Drive and Dump
- Heavy Duty Spiral Blades available for 30% Faster Mix
- Lifetime Warranty on Drum Bearings
- Crown's 3/8" Endplates are up to 80% Thicker than the
Competition
- Drive and Dump Controls are Conveniently Placed
- Swing-Away Hood is Thicker at 12 USG
- Heavy Duty 1/4" Abrasion Resistant Steel Wrap 20%
Thicker than the Competition
- Weight - Max lbs: 1115
|
|
Crown 12SH
 |
Crown 12SH:
- Heavy duty spiral mixing blades available for 30%
faster mix
- 2" solid steel paddle shaft
- Drive dump controls conveniently placed
- Swing away hood is thicker at 12 USG
- Lifetime warranty on drum bearings
- Crown's 3/8" endplates are up to 80% thicker than the
competition
- Heavy duty 1/4" abrasive resistant steel wrap is
20% thicker than the competition
|
|
Essick EM120SHD
 |
Essick EM120SHD :
- Rugged 14 gauge steel engine covers with punched ventilation openings for
increased cooling and added strength.
- High strength cast iron paddle arms with rubber blades for a clean,
uniform mix.
- Durable paddle shaft of 13/4" square hardened steel. 12 spring-loaded self
adjusting seals. No greasing required.
- Heavy duty removable tow tongue made of tough schedule 80 steel
- Steel or Easy Clean polyethylene drums
- Heavy duty safety grate with built-in bag cutter.
- Available with loop, or 2-inch ball or pintype coupler
|
Curbing
Trailers |
|
  |
Designed and constructed to meet the rigorous demands of the
curbing business. Designed by Curbers with the intent to
safely and securely transport, from jobsite to jobsite, the
equipment and materials required to do professional concrete
curbing. Each trailer is custom built to meet individual
customer specifications. ·
- 12,000 GVW Custom Curbing Trailer, Bumper Pull
- 14,000 GVW Custom Curbing Trailer, Goose Neck
|
|
